Icom IC-4008E - Selecting the Operating Channel

BASIC OPERATION
9
4
‘‘
Selecting the operating channel
Push [UP]/[Y] or [DOWN]/[Z] keys sev-
eral times until the desired operating
channel number appears on the dis-
play.
• While pushing and holding [
UP]/[Y] or
[
DOWN]/[Z] keys, the displayed chan-
nel changes continuously until chan-
nel number “ 1 ” appears.
If you want to keep the automatic se-
lection, release the [
UP]/[Y] or
[
DOWN]/[Z] keys then push and hold them again.
• When displayed channel stops at channel number “01”, a warn-
ing beep is emitted.
NOTE:
• The transceiver has 69 operating frequency channels.
• The selected channel is memorised when you turn off the
transceiver.
UP
DOWN
M
O
DE
P
O
W
E
R
IC-4008E-2 02.3.23 3:26 PM Page 14 (1,1)