SECTION 1 SPECIFICATIONS
1 - 1
‘‘
GENERAL
• Number of channel : 8 channels (simplex; 446.00625–446.09375 MHz)
• Type of emission : 8K50F3E (FM)
• Frequency stability : ±2500 Hz (±5.6 ppm)
• Frequency resolution : 12.5 kHz
• Antenna impedance : 50 Ω
• Power supply requirement (negative ground) : 3
×
AA (R6) dry, alkaline; or BP-202 (optional Ni-Cd battery pack)
• Current drain : Less than 140 mA
• Operating temperature range : –20˚C to +55˚C
• Number of CTCSS frequency : 38 (67.0–250.3 Hz)
• Dimensions (projections not included) : 52.5
(W) × 102.5 (H) × 26.9 (D) mm
• Weight (included 3 cells) : 200 g (Approx.)
‘‘
TRANSMITTER
• Output power : Less than 500 mW ERP
• Modulation system : Variable reactance frequency modulation
• Max. frequency deviation : ±2.5 kHz
• Spurious emissions : 0.25 µW
• Adjacent channel power : More than 60 dB
• External microphone connector : 3-conductor 2.5(d) mm/2.2 kΩ
‘‘
RECEIVER
• Receiving system : Double conversion superheterodyne system
• Intermediate frequency : 1st; 21.7 MHz
2nd; 450 kHz
• Sensitivity (12 dB SINAD) : 0.25 µV; –12 dBµ
• Adjacent channel selectivity : More than 55 dB
• Spurious response : More than 65 dB
• Intermodulation : More than 60 dB
• Audio output power : 100mW at 10% distortion with an 8 Ω load
• External SP connector : 2-conductor 3.5(d) mm/8 Ω
All stated specifications are subject to change without notice or obligation.
To Next Page
