6
TONE SQUELCH AND POCKET BEEP
6-3
Pocket Beep
This function uses the CTCSS tone and the DTCS
code for calling. You can also use it as a “common
pager” to inform you that someone called while you
were away from the transceiver.
D Waiting for a call from a station
Before using the Pocket Beep, set the desired CTCSS
tone frequency or DTCS code in the Set mode.
1) Hold down [MONI] for 2 seconds several times until
“TSQL
ë
” is displayed.
• Holding down [MONI] for 2 seconds switches between
“TSQL” (Tone Squelch), “TSQL
ë
” (Pocket Beep), and
OFF (cancel).
2) When you receive a signal with a matching tone or
code, a beep sounds every 10 seconds and “
ë
”
blinks.
3) Hold down [PTT] to answer and to stop the beep
and blinking.
• The transceiver automatically selects Tone Squelch.
To Next Page
Loading...
