Icom IC-410PRO - Rear Panel Connection; Mounting the Transceiver

1
ACCESSORIES AND INSTALLATION
1-3
Rear panel connection
e
r
q
w
t
R
WARNING! NEVER remove
the fuse holder from the DC
power cable.
q ANTENNA CONNECTOR
Connects an antenna cable.
w EXTERNAL SPEAKER JACK
 Connecta4–8Ωexternalspeaker.
e MICROPHONE HANGER
Connect the supplied microphone
hanger to the vehicle’s ground to
use the microphone ON/OFF hook
functions.
r OPTIONAL CABLE (OPC-1939)
 Connectanexternalhorn,andsoon.
Ask your dealer for details.
t DC POWER RECEPTACLE
Connects to a 12 V DC power source.
Pay attention to polarities.
R
WARNING! NEVER
connect
to a 24 V battery. This could
damage the transceiver.
Antenna
Optional speaker
12 V
Battery
NOTE: Use the terminals as shown
below for the cable connections.
Red
Solder
Crimp
Black
Microphone
hanger cable
Mounting the transceiver
Flat washer
Felt*
Spring washer
When using
self-tapping screws
*Felt reduces vibration