Icom IC-705 - Q&A (GPS Logger mode); GPS signal cannot be received; What is the recording interval?; When altitude information is not recorded?

Tighten the screws firmly, making sure that the body of the backstay lines up with the top of the
frame.
9. Now that the backstays are secured, you can tighten the screws holding the frame to the bottom
bracket. Tighten these screws securely.
10.When completely assembled, you can lower the screen cover to protect the screen during
transport or storage of the rig.
When the rig is in use, you can adjust the position of the screen cover to make an effective sun
shade.