Icom IC-7100 Reference Manual

TIPS FOR THE USB PORT SETTINGS
3
TABLE OF CONTENTS
SECTION 1
ABOUT “DTR” AND “RTS” .................................................................................................. 4
SECTION 2 ABOUT LINK SETTING FOR BETWEEN USB PORT AND REMOTE JACK ..................... 6
SECTION 3 WHY TWO VIRTUAL COM PORTS ARE RECOGNIZED ON ONE PHYSICAL
USB PORT ............................................................................................................................. 7
3-1 How to check the internal circuit for each COM port ................................................... 8
3-2 How to change the COM port number ....................................................................... 10

Icom IC-7100 Specifications

General

Supply	13.8 V DC ±15%
Voltage	13.8 V DC
Operating Temperature	-10°C to +60°C
Frequency Coverage	0.030-199.999 MHz, 400-470 MHz
Modes	SSB, CW, AM, FM, DV
Output Power	HF/50MHz: 100W, 144MHz: 50W, 430MHz: 35W
Receiver Type	Superheterodyne
Antenna Connector	SO-239 (HF/50MHz/144MHz), N-type (430MHz)
Weight	Main unit: 2.3 kg
Type	Base/Mobile
Frequency Range TX	1.8–54 MHz, 144–148 MHz, 430–450 MHz
Frequency Range RX	0.030–199.999 MHz, 400–470 MHz
Memories	505
Current Consumption	TX: 22 A, RX: 1.2 A