ANTENNA SELECTOR
• Switches the antenna connector selection between ANT1 and ANT2
when pushed.
– The IC-746PRO has 2 antenna connectors for the HF/50 MHz bands,
[ANT1] and [ANT2], and 1 antenna connector for the 144 MHz band; a
total of 3 antenna connectors.
– For each operating band the IC-746PRO covers, there is a band memory
which can memorize a selected antenna. When you change the operating
frequency beyond a band, the previously used antenna is automatically
selected. Convenient when you use 2 antennas for HF and 50 MHz bands
operation.
Antenna Suggestions
To Next Page
Loading...
