Icom IC-756PRO - Page 3

1LOA
- Connect RF volt meter to P651
- Set display to 0.030000MHz
- Verify RF output level for 0dBm or higher
- Set display to 7.999999MHz
- Verify RF output level for 0dBm or higher
- Set display to 8.000000MHz
- Verify RF output level for 0dBm or higher
- Set display to 19.999999MHz
- Verify RF output level for 0dBm or higher
- Set display to 20.000000MHz
- Verify RF output level for 0dBm or higher
- Set display to 44.999999MHz
- Verify RF output level for 0dBm or higher
- Set display to 45.000000MHz
- Verify RF output level for 0dBm or higher
- Set display to 60.000000MHz
- Verify RF output level for 0dBm or higher
3LO
- Connect RF volt meter to P701
- Verify RF output level for –16dBm or higher
S3LO
- Connect RF volt meter to P801
- Verify RF output level for –7dBm or higher
S2LO
- Connect RF volt meter to P901
- Verify RF output level for 0dBm or higher
Marker
- Connect oscilloscope to P851
- Verify output signals for 4Vpp or higher