Icom IC-7610

D Command formats (Continued)
• Memory content
Command: 1A 00
X
e r ~ i o, !0 !1 !2 ~ !4 !5 ~ !7
X X X ... ...X X X X X X X X X X X X X X X X X XX XX X X X X X X X
q, w !8 ~ @7
q, w Memory channel numbers
0001 ~ 0099: Memory channel 01 to 99
0100: Programmed scan edge P1
0101: Programmed scan edge P2
e Select memory setting
LSet 0 for P1 and P2.
r ~ i Operating frequency setting
See “• Operating frequency.”
o, !0 Operating mode setting
See “• Operating mode.”
!1 Data mode and tone type settings
!2 ~ !4 Repeater tone frequency setting
!5 ~ !7 Tone squelch frequency setting
See “• Repeater tone/tone squelch settings.”
!8 ~ @7 Memory name settings
Up to 10 characters.
See “• Codes for character entries.”
To clear the memory channel contents on 1A 00:
q, w: Memory channel (0001~0099)
e: “FF”
r: None
0X
e
0=OFF
Fixed
1= 1
2= 2
3= 3
X X
!1
0: OFF, 1: TONE, 2: TSQL
0: OFF, 1: DATA 1, 2: DATA 2, 3: DATA 3
• Codes for character entries
Command: 1A 00, 1A 05 0133, 0140, 0155, 0161,
0165
- Character codes— Letters and Numbers
Character ASCII code Character ASCII code
A–Z 41–5A a-z 61–7A
0–9 30–39
- Character codes— Symbols
Character ASCII code Character ASCII code
! 21 # 23
$ 24 % 25
& 26 \ 5C
? 3F ” 22
’ 27 ` 60
^ 5E + 2B
− 2D
✱
2A
/ 2F . 2E
, 2C : 3A
; 3B = 3D
< 3C > 3E
(
28
)
29
[
5B
]
5D
{
7B
}
7D
|
7C
_
5F
 7E @ 40
Command Set item/selectable characters
1A 00 Memory name
All characters are usable.
1A 05 0133 Network > Network Name
(up to 15 characters)
0140 Network > Network Radio Name
(up to 16 characters)
0155 Display > My Call
(up to 10 characters)
0161 Time Set > Date/Time >
NTP Server Address
0165 Time Set > CLOCK2 Name
(up to 3 characters)
Remote control
11