Icom IC-7610 - TX;ID Adjustments; Tuner;Reference Adjustments

D Command formats (Continued)
• Memory keyer character entries
Command: 1A 02
- Character codes
Character
ASCII
code
Description
0 ~ 9 30 ~ 39 Numbers
A ~ Z 41 ~ 5A Letters
space 20 Word space
/ 2F Symbol
? 3F Symbol
, 2C Symbol
. 2E Symbol
@ 40 Symbol
^ 5E Example: to send
BT,
enter ^4254
✱
2A Inserts contest number
(can be used for 1 channel only)
X
q: Channel data
01： M1 05：
M5
02： M2 06：
M6
03: M3 07: M7
04: M4 08: M8
w ~ &1: Text data
X X X
……
X X
• Memory keyer content
Command: 1A 02
• UTC Offset setting
Command: 1A 05 0162, 0164
• Antenna memory settings
Command: 1A 05 0276 to 0287
q w
XX X X
q
ANT1/ANT2
w
RX-ANT or RX-I/O
00:ANT 1 00:RX-ANT or RX-I/O OFF
01:ANT 2 00:RX-ANT or RX-I/O ON*
*Depending on the selected antenna type.
X
Shift direction
00: + (plus)
01: − (minus)
Offset time
0000 ~ 1400
XXX XX
• RIT frequency settings
Command: 21 00
10 Hz: 0–9 100 Hz: 0–9 1 Hz: 0–9 1 kHz: 0–9
XXXX XX
00: + (plus)
01: – (minus)
• Repeater tone/tone squelch frequency settings
Command: 1B 00, 1B 01
100Hz digit: 0–2 10 Hz digit: 0–9 1 Hz digit: 0–9 0.1 Hz digit: 0–9 Fixed digit: 0* Fixed digit: 0*
q*
00X
XX
we
X
*Not necessary when setting a frequency.
• Main or Sub band's frequency settings
Command: 25
X X X X X X X X X X 0 0
00: MAIN
01: SUB
Operating frequency data
(See p. 10)
• Main or Sub band's operating mode and lter
settings
Command: 26
Both data and lter settings can be skipped. In that
case, “DATA OFF” and the default lter setting of
the operating mode are automatically selected.
X X X X X XX X
q Operating mode setting
e
Filter setting
w Data mode setting
00: MAIN 01: SUB
q Operating mode w Data mode setting
e Filter
setting
00: LSB 05: FM 00: Data mode OFF 01: FIL1
01: USB 07: CW-R 01: Data mode 1 (D1) 02: FIL2
02: AM 08: RTTY-R 02: Data mode 2 (D2) 03: FIL3
03: CW 12: PSK 03: Data mode 3 (D3)
04: RTTY 08: PSK-R
Remote control
13