Icom IC-7610

Cmd. Sub cmd. Data Description
0137 000001 ~
065535
Network > Serial Port (UDP) (valid after restart)
(000001=1 to 065535=65535)
0138 000001 ~
065535
Network > Audio Port (UDP) (valid after restart)
(000001=1 to 065535=65535)
0139 00 or 01 Network > Internet Access Line (valid after
restart)
( 00=FTTH (Fiber To The Home), 01=ADSL/
CATV)
0140 see p. 11 Network > Network Radio Name
(Up to 16 characters)
0141 0000 ~ 0255 Display > LCD Backlight
(0000=0% to 0255=100%)
0142 0000 ~ 0255 Display > LED Bright
(0000=0% to 0255=100%)
0143 00 or 01 Display > Display Type
(00=A, 01=B)
0144 00 or 01 Display > Display Font
(00=Basic, 01=Round)
0145 00 ~ 02 Display > Meter Response (Standard,
Edgewise)
(00=Slow, 01=Mid, 02=Fast)
0146 00 ~ 02 Display > Meter Type (Normal Screen)
(00=Standard, 01=Edgewise, 02=Bar)
0147 00 or 01 Display > Meter Type (Expand Screen)
(00=Edgewise, 01=Bar)
0148 00 or 01 Display > Meter Peak Hold (Bar)
(00=OFF, 01=ON)
0149 00 or 01 Display > Memory Name
(00=OFF, 01=ON)
0150 00 or 01 Display > APF-Width Popup (APF OFF→ON)
(00=OFF, 01=ON)
0151 00 ~ 03 Display > Screen Saver
( 00=OFF, 01=15 minutes, 02=30 minutes,
03=60 minutes)
0152 00 or 01 Display > External Display
(00=OFF, 01=ON)
0153 00 or 01 Display > External Display Resolution
(00=800x480, 01=800x600)
0154 00 or 01 Display > Opening Message
(00=OFF, 01=ON)
0155 see p. 11 Display > My Call
(Up to 10 characters)
0156 00 or 01 Display > Power ON Check
(00=OFF, 01=ON)
0157 00 or 01 Display > Display Language
(00=English, 01=Japanese)
0158 20000101 ~
20991231
Time Set > Date/Time > Date
(20000101=2000/01/01 to 20991231=2099/12/31)
0159 0000 ~ 2359 Time Set > Date/Time > Time
(0000=00:00 to 2359=23:59)
0160 00 or 01 Time Set > Date/Time > NTP Function
(00=OFF, 01=ON)
0161 see p. 11 Time Set > Date/Time > NTP Server Address
0162 see p. 13 Time Set > UTC Offset
0163 00 or 01 Time Set > CLOCK2 Function
(00=OFF, 01=ON)
0164 see p. 13 Time Set > CLOCK2 UTC Offset
0165 see p. 11 Time Set > CLOCK2 Name
(Up to 3 characters)
0166 00 or 01 SCOPE > Scope during Tx (CENTER TYPE)
(00=OFF, 01=ON)
0167 00 ~ 02 SCOPE > Max Hold
(00=OFF, 01=10s Hold , 02=ON)
0168 00 ~ 02 SCOPE > CENTER Type Display
( 00=Filter center, 01=Carrier point center,
02=Carrier point center (Abs. Freq.))
0169 00 or 01 SCOPE > Marker Position (Fix Type)
(00=Filter center, 01 Carrier point)
0170 00 ~ 03 SCOPE > Averaging
(00=OFF, 01=2, 02=3, 03=4)
0171 00 or 01 SCOPE > Waveform Type
(00=Fill, 01=Fill+Line)
0172 see p. 12 SCOPE > Waveform Color (Current)
0173 see p. 12 SCOPE > Waveform Color (Line)
0174 see p. 12 SCOPE > Waveform Color (Max Hold)
0175 00 or 01 SCOPE > Waterfall Display
(00=OFF, 01=ON)
Cmd. Sub cmd. Data Description
0176 00 ~ 02 SCOPE > Waterfall Speed
(00=Slow, 01=Mid, 02=Fast)
0177 00 ~ 02 SCOPE > Waterfall Size (Expand Screen)
(00=Small, 01=Mid, 02=Large)
0178 00 ~ 09 SCOPE > Waterfall Peak Color Level
(00=Grid 1 to 09=Grid 10)
0179 00 or 01 SCOPE > Waterfall Marker Auto-hide
(00=OFF, 01=ON)
0180 00 or 01 SCOPE > Dual Scope Type
(00=Over/Under, 01=Side by Side)
0181 00 or 01 SCOPE > Dual Scope Auto Select
(00=OFF, 01=ON)
0182 see p. 12 SCOPE > Fixed Edges > 0.03 – 1.60 No.1
0183 see p. 12 SCOPE > Fixed Edges > 0.03 – 1.60 No.2
0184 see p. 12 SCOPE > Fixed Edges > 0.03 – 1.60 No.3
0185 see p. 12 SCOPE > Fixed Edges > 1.60 – 2.00 No.1
0186 see p. 12 SCOPE > Fixed Edges > 1.60 – 2.00 No.2
0187 see p. 12 SCOPE > Fixed Edges > 1.60 – 2.00 No.3
0188 see p. 12 SCOPE > Fixed Edges > 2.00 – 6.00 No.1
0189 see p. 12 SCOPE > Fixed Edges > 2.00 – 6.00 No.2
0190 see p. 12 SCOPE > Fixed Edges > 2.00 – 6.00 No.3
0191 see p. 12 SCOPE > Fixed Edges > 6.00 – 8.00 No.1
0192 see p. 12 SCOPE > Fixed Edges > 6.00 – 8.00 No.2
0193 see p. 12 SCOPE > Fixed Edges > 6.00 – 8.00 No.3
0194 see p. 12 SCOPE > Fixed Edges > 8.00 – 11.00 No.1
0195 see p. 12 SCOPE > Fixed Edges > 8.00 – 11.00 No.2
0196 see p. 12 SCOPE > Fixed Edges > 8.00 – 11.00 No.3
0197 see p. 12 SCOPE > Fixed Edges > 11.00 – 15.00 No.1
0198 see p. 12 SCOPE > Fixed Edges > 11.00 – 15.00 No.2
0199 see p. 12 SCOPE > Fixed Edges > 11.00 – 15.00 No.3
0200 see p. 12 SCOPE > Fixed Edges > 15.00 – 20.00 No.1
0201 see p. 12 SCOPE > Fixed Edges > 15.00 – 20.00 No.2
0202 see p. 12 SCOPE > Fixed Edges > 15.00 – 20.00 No.3
0203 see p. 12 SCOPE > Fixed Edges > 20.00 – 22.00 No.1
0204 see p. 12 SCOPE > Fixed Edges > 20.00 – 22.00 No.2
0205 see p. 12 SCOPE > Fixed Edges > 20.00 – 22.00 No.3
0206 see p. 12 SCOPE > Fixed Edges > 22.00 – 26.00 No.1
0207 see p. 12 SCOPE > Fixed Edges > 22.00 – 26.00 No.2
0208 see p. 12 SCOPE > Fixed Edges > 22.00 – 26.00 No.3
0209 see p. 12 SCOPE > Fixed Edges > 26.00 – 30.00 No.1
0210 see p. 12 SCOPE > Fixed Edges > 26.00 – 30.00 No.2
0211 see p. 12 SCOPE > Fixed Edges > 26.00 – 30.00 No.3
0212 see p. 12 SCOPE > Fixed Edges > 30.00 – 45.00 No.1
0213 see p. 12 SCOPE > Fixed Edges > 30.00 – 45.00 No.2
0214 see p. 12 SCOPE > Fixed Edges > 30.00 – 45.00 No.3
0215 see p. 12 SCOPE > Fixed Edges > 45.00 – 60.00 No.1
0216 see p. 12 SCOPE > Fixed Edges > 45.00 – 60.00 No.2
0217 see p. 12 SCOPE > Fixed Edges > 45.00 – 60.00 No.3
0218 00 or 01
AUDIO SCOPE SET > FFT Scope Waveform Type
(00=Line, 01=Fill)
0219 see p. 12 AUDIO SCOPE SET >
FFT Scope Waveform Color
0220 00 or 01 AUDIO SCOPE SET >
FFT Scope Waterfall Display
(00=OFF, 01=ON)
0221 see p. 12 AUDIO SCOPE SET >
Oscilloscope Waveform Color
0222 00 ~ 04 KEYER 001 > Number Style
( 00=Normal, 01=190→ANO, 02=190→ANT,
03=90→NO, 04=90→NT)
0223 01 ~ 08 KEYER 001 > Count Up Trigger
(01=M1 to 08=M8)
0224 0001 ~ 9999 KEYER 001 > Present Number
(0001=1 to 9999=9999)
0225 0000 ~ 0255 CW-KEY SET > Side Tone Level
(0000=0% to 0255=100%)
0226 00 or 01 CW-KEY SET > Side Tone Level Limit
(00=OFF, 01=ON)
0227 01 ~ 60 CW-KEY SET > Keyer Repeat time
(01=1 sec. to 60=60 sec.)
0228 28 ~ 45 CW-KEY SET > Dot/Dash Ratio
(28=1:1:2.8 to 45=1:1:4.5; 0.1 steps)
D Command table (Continued)
1A* 05 1A* 05
Remote control
7