26
5
MENU MODE
■ MENU mode items (Continued)
D Dimmer Brightness (Manually) “DISP MAN.”
Set the brightness manually to suit your own preferences.
• 0–100 : Setting dimmer level manually from 0 (OFF) to 100.
D Dimmer Response “DISP RESP.”
Set the dimmer switching speed when selecting “AUTO” at
the “Dimmer Mode.”
• STANDARD
: Selecting switch speed is normal.
• FAST : Selecting switch speed is fast.
D Frequency Display “FREQ DISP”
Set the 1 kHz digit frequency displaying to the OLED.
• OFF : The 1 kHz digit always does not display on the OLED.
• ON : The 1 kHz digit always display on the OLED.
• ZERO SUPP.
: The 1 kHz digit display on the OLED (Except the digit
is 0).
D USER-1 Setting “U-1 ID SET”
Set the USER-1, channel tag, to the desired ID.
q Push [MEM] to enter the U-1 ID edit mode.
w Rotate [DIAL] to select the desired character.
e Rotate [O-DIAL] to select the next input digit.
r Repeat w–e to input the U-1 ID.
t Push [MEM] again to store the U-1 ID, and exit the edit mode.
D USER-2 Setting “U-2 ID SET”
Set the USER-2, channel tag, to the desired ID.
q Push [MEM] to enter the U-2 ID edit mode.
w Rotate [DIAL] to select the desired character.
e Rotate [O-DIAL] to select the next input digit.
r Repeat w–e to input the U-2 ID.
t Push [MEM] again to store the U-2 ID, and exit the edit mode.
D External Input “AUX IN”
Set the external input mode.
• OFF : The external input does not use.
• ON : The external input is available while squelch is closing.
• INCOM : The external input is available with the intercom opera-
tions as following.
- The intercom function is OFF.
- While the intercom function does not use.
- While audio signal does not input to the intercom’s mi-
crophone.
To Next Page
Loading...
