Icom IC-A22E

mmm S = SPECIFICATIONS
i GENERAL * Modulation system : Low level modulation
» Frequency coverage : * Spurious emissions* ess than — 60 dB
COM
band
*
External
microphone:
1509
NAV
band
impedance
Receive
MIRECEIVER
awed : * Receive system : Double-conversion
“ = superheterodyne
Transmitirecelve ‘AM (6KOOASE) Intermediate frequencies :1st 35.8 MHz
Receive FM (16KOG3E)* 2nd 455 kHz
* Antenna impedance :50 Q (nominal) * Sensitivity : Less than 1.0 nV
. biclicriiig : Lethe = (for 6 dB S/N with 1 kHz, 30% modulation)
ity" :
© Current drain (at 12 V DC): Transmit 1.0 A typical = Elec ih aaneeiiny F pane A ee 6dB
Rated audio 400 mA max. "Less than 25 kHz/— 60 dB
Cant SoA NPS * Spurious response —-: More than 60 dB
i 2
Usable temperature range: — 10°C to +50°C; fe ee :More than 25 dB
+14°F to +122°F Z
* Audio output power* : More than 0,6 W at 10%
*
Frequency
stability
:
£20
ppm
(—10°C
to
+50°C)
(at12
vc)
j
distortion
with
an
8.Q
load,
* Dimensions :57(W) X 153(H) x 35(D) mm © Audio output impedance :80
(projections not included) 2 1/4(W) x 6 1/s2(H) x 1 3/a(D) in :
«Weight 1403 gr 18Aiaz * Weather channels and FM mode: U.S.A. version only.
(with CM-166 and antenna) * Specifications guaranteed at a transceiver temperature of +25°C
(+77 F).
i TRANSMITTER
© Output power* :5.0 W (PEP power) All stated specifications are subject to change without
(at 12 V DC, typical) 1.5 W (Carrier power) notice or obligation.
27 "