Icom IC-A3 - Accessing the 121.5 Mhz; Emergency Frequency; Setting a Frequency; Basic Operation

=a |
MMS BASIC OPERATION
o|
i Accessing the 121.5 MHz
emergency frequency
The IC-A3 can quickly access the 121.50 MHz emergency
frequency. This function can be activated even when the
keypad lock function is in use. (p. 10)
@ Rotate [VOL] to turn power ON.
@® Push [F] on the keypad.
©" @ “appears.
@® Push [© 121.5] to call the emer-
gency frequency.
@ Push [CLR] to exit from the
emergency frequency.
EXAMPLE: Setting the frequency to 120.000 MHz using the keypad.
i Setting a frequency
© Using the keypad
@ Rotate [VOL] to turn power ON.
@® Push [CLR] to select frequency mode when “M” or “WX”
appears in the function display.
@ Push 5 appropriate digit keys to input the frequency.
+ Enter [1] as the 1st digit.
* When a digit is mistakenly input, push [CLR] to clear the
input, then start again.
* Push [ENT] to enter consecutive zero digits.
* Only [2}, [5], [7] or [0] can be entered as the Sth and final digit,
@ To change the frequency according to the tuning step
(25 kHz step), push [A] or [W].
+ Push and hold [ A] or ['¥] to change the frequency quickly.
EXAMPLE: Setting frequency to 136.425 MHz using the keypad.
Oo
@O@