Need help?Do you have a question about the Icom IC-A110 and is the answer not in the manual?
General| Frequency Range | 118.000–136.975 MHz |
|---|---|
| Channel Spacing | 25 kHz / 8.33 kHz |
| Power Supply Requirement | 13.75 V DC ±15% |
| Output Power | 36W (PEP), 9W (carrier) |
| Dimensions | 150 × 50 × 180 mm (W × H × D) |
| Modulation | AM |
| Operating Temperature Range | -20°C to +55°C –4°F to +131°F |
Overall specifications including frequency coverage, channel spacing, power supply, and dimensions.
Technical specifications related to the transmitter's RF output, modulation, and emissions.
Technical specifications for the receiver's sensitivity, selectivity, and audio output.
Procedure for adjusting VDD voltage, PLL lock voltage, and reference frequency.
Procedure for adjusting output power, modulation depth, and headset modulation.
Procedure for adjusting RX sensitivity and squelch thresholds.
Schematic showing voltage distribution and test points on the front unit.
Schematic showing voltage distribution and test points on the main unit.
To Next Page
