Need help?Do you have a question about the Icom IC-A16 and is the answer not in the manual?
General| Channel Spacing | 8.33 kHz/25 kHz |
|---|---|
| Number of Memory Channels | 200 channels |
| Antenna Impedance | 50 Ω |
| Waterproof | IP67 |
| Display | LCD |
| Frequency Range | 118.000–136.9916 MHz |
| Output Power | 6 W (PEP), 1.8 W (carrier) |
| Weight | Approx. 300 g (with standard battery) |
| Power Supply Requirement | 7.2 V DC |
| Current Drain (Transmit) | 1.5 A |
| Mode | AM |
| Channels | 200 |
| Voltage | 7.2V |
Overview of the manual's content and purpose.
Essential precautions to prevent equipment damage.
Guidelines for identifying and ordering spare parts.
Key considerations before and during repair procedures.
Basic operational and physical characteristics of the transceiver.
Detailed parameters for transmitting functions.
Top-side layout of components on the front unit.
Step-by-step guide to detach the front panel assembly.
Required equipment and setup for calibration.
List of components for the transceiver's front unit.
Mechanical components of the chassis unit.
Mechanical components of the main unit.
Mechanical components of the front unit.
List of included mechanical accessories.
Component placement on the front unit PCB (top view).
Voltage supply lines and levels for the front unit.
To Next Page
