Icom IC-F50 - Receiving a message; Receiving a status message

26
4
BIIS OPERATION
4
■ Receiving a message
DD
Receiving a status message
q When a status message is received;
• Beeps sound.
• The calling station ID (or text) and the status message is displayed
alternately, depending on the setting.
w Push [P3] (Moni(Audi)) to return to the standby condition.
NOTE: Only the calling station ID (or text) is displayed (no
message is displayed alternately) when the scroll timer is set
to “OFF”. In this case, push [Status Up]/[Status Down] to dis-
play the status message manually.
IC-F50_F60_MDC-2.qxd 06.11.17 4:39 PM Page 26 (1,1)