12
2
BASIC OPERATION
■ Stun function
When the specified ID, set as a stun ID or kill ID, is received,
the stun function is activated.
When the stun ID is received, the transceiver becomes
unusable. Entering of the password (p. 7) or receiving a
specified ID, set as a revive ID, is necessary to operate the
transceiver again in this case.
When the kill ID is received, the transceiver switches to
the cloning required condition. Cloning the transceiver is
necessary to operate the transceiver again in this case.
Stun function can be also used with the MDC 1200 signaling
system. (p. 13)
■ Priority A channel selection
When one of the following operations is performed, the
transceiver selects the Priority A channel automatically.
• Turning ON the transceiver
The Priority A channel is selected each time the transceiver
is turned ON.
• Off hook.
The Priority A channel is selected when the microphone is
taken off its hanger.
To Next Page
Loading...
Need help?
General
