Icom IC-F9521T User Manual


Programmable function keys
SCAN B START/STOP KEY
4-1-3 Programmable Function Keys
IC-F9511S/T,F9521S/T,F9523S/T

Programmable function keys
The following functions can be assigned to [DIAL]*,
[UP], [DOWN], [P0], [P1], [P2], [P3] and [P4]
programmable function keys. Consult your Icom
dealer or system operator for details concerning your
transceivers programming.
If the programmable function names are bracketed
SCAN B START/STOP KEY
➥ Push to start and cancel scanning operation.
The scan restarts after the specified time
period has passed when the scan (started
with this key) is cancelled by this key
operation.
➥ Push and hold this key for 1 sec to indicate
the scan list, then push [CH Up] or [CH Down]
t t [CH U /D ]* t l t th
If the programmable function names are bracketed
in the following explanations, the specific key is used
to activate the function depends on the
programming.
* The functions you can assign to [DIAL] are
limited.(Only functions marked with ✩ can
be assigned.)
✩
CH UP AND DOWN KEYS
or
ro
t
a
t
e
[CH U
p
/D
own
]* t
o
se
l
ec
t th
e
desired list.
SCAN ADD/DEL (TAG) KEY
Push to add or delete the selected channel to/from
the scan list.
1 Push to indicate the scan list, then push [CH
Up] or [CH Down] or rotate [CH Up/Down]
✩
CH UP AND DOWN KEYS
➥ Push (or Rotate)* to select an operating
channel.
➥ Push (or Rotate)* to select a scan group after
pushing and holding [Scan A
Start/Stop]/[Scan B Start/Stop].
* Rotate when this function is assigned to [DIAL].
* to select the desired list.
2 Push to add or delete the channel to/from
the selected scan list.
3 Push and hold for 1 sec to exit the scan list
selection mode.
PRIO A/B KEYS
➥ P
us
h
to
se
l
ect
Pri
o
ri
ty
A
o
r Pri
o
ri
ty
B
c
h
a
nn
e
l.
✩ ZONE UP AND DOWN KEY
(This function is for [DIAL] only) Rotate to
select the desired zone.
ZONE KEY
Push this key, then push [CH Up] or [CH Down] or
rotate [CH Up/Down]* to select the desired zone.
us to se ect o ty o o ty c a e
➥ Push and hold [Prio A (Rewrite)] or [Prio B
(Rewrite)] for 1 sec to rewrite the operating
channel as the Priority A or Priority B channel.
MR-CH 1/2/3/4 KEYS
Push to select the memory channel 1 to 4 directly.
MONI KEY
 What is “zone”?—The desired channels are
 assigned into a zone according to the intended
 use for grouping. For example, ‘Staff A’ and
‘Staff B’ are assigned into a “Business” zone,
 and ‘John’ and ‘Cindy’ are assigned into a
“Private” zone.
SCAN A START/STOP KEY
MONI KEY
➥ Mute and release the CTCSS (DTCS), NAC or
Talkgroup ID squelch mute. Open any
squelch/deactivate any mute while pushing
this key.
➥ Depending on the pre-set value, pushing and
holding this key for 1 sec cancels the scan.
For the IC-F9511S/T, this function is not
il bl i t i ith i i
SCAN A START/STOP KEY
➥ Push to start and cancel scanning operation.
• When Power ON Scan function is activated,
push to pause the scanning operation. And the
paused scan resumes after the specified time
period has passed.
➥ Push and hold this key for 1 sec to indicate
th li t th h [CH U ] [CH D ]
ava
il
a
bl
e
i
n
t
ransce
i
vers
w
ith
a
rev
i
s
i
on
number of 1.2 or lower.
TALK AROUND KEY
(Conventional operation only)
Turn the talk-around function ON and OFF.
• The talk around function equalizes the
transmit frequency to the receive frequency
28
th
e
scan
li
s
t
,
th
en
pus
h [CH U
p
]
or
[CH D
own
]
or rotate [CH Up/Down]* to select the desired
list. (Available depending on the presetting.)
for transceiver
-
to
-
transceiver communication.

Icom IC-F9521T Specifications

General

Brand	Icom
Model	IC-F9521T
Category	Transceiver
Language	English