Icom IC-GM1600 - Set Mode Configuration; Entering Set Mode

5
■ SET mode programming
SET mode is used to change the condition of 11 transceiver
functions: beep tone function, monitor switch action, backlit
function, LCD contrast selection, auto power save function,
self check function, battery voltage indicator, signal strength
indicator and squelch sensitivity function.
D SET mode operation
q Turn power OFF.
w While pushing [SQL•
MONI], turn power ON to enter the
SET mode.
• “bp” (Beep tone function setting) appears.
e Push [SQL•MONI] or [SQL•MONI] and [Y]/[Z] to select
the desired item, if necessary.
r Push [Y]/[Z] to select the desired condition of the item.
t Push [16] to exit the SET mode.
D SET MODE ITEMS
The displays show the default settings, and the selected item is displayed in the dotted circle.
11
Beep tone
Monitor switch
: Push
: Push and
Starting item
Push and
Battery v
oltage
Backlighting
Auto power save
Self check
Squelch sensitivity
LCD contrast
Signal strength indicator
5
SET MODE