What does self check error mean for Icom IC-GM1600E battery?
If your Icom Two-Way Radio has a self-check error related to battery voltage, it means the connected battery pack’s voltage is more than 11 V. Verify the battery voltage is correct.
What does self check error mean for Icom IC-GM1600E Two-Way Radio temperature?
If your Icom Two-Way Radio has a self-check error related to temperature, it means the temperature is outside of –35°C to +80°C (approx.). Leave the transceiver at room temperature for a while. Turn the power ON to check if the internal temperature has returned to normal.
How to fix an Icom IC-GM1600E that does not turn on?
If your Icom Two-Way Radio isn't turning on, it might be due to: * A depleted battery. Replace the battery pack. * A poor connection to the battery pack. Check the connection to the transceiver to ensure it is secure.
What to do if the displayed channel cannot be changed on Icom Two-Way Radio?
If you cannot change the displayed channel, the lock function may be activated. Push [Hi/Lo• ] for 1 second to cancel the function.
How to enable beeps on Icom IC-GM1600E Two-Way Radio?
If you are not hearing any beeps, the beep tones may be turned OFF. Set the beep tones to ON (Fix Beep/User Beep) in the SET mode.
What to do if there is no sound from the Icom Two-Way Radio speaker?
If you can't hear any sound from the Icom Two-Way Radio speaker, there might be several reasons. Check if the squelch level is set too high and adjust it to the threshold point. Also, make sure the volume isn't too low by rotating the [VOL] knob to a suitable level. If the speaker has been exposed to water, drain it. Lastly, dry the [MIC/SP] connector if water has entered it.
Why my Icom IC-GM1600E Two-Way Radio does not turn ON?
If your Icom Two-Way Radio does not turn on, the battery may be exhausted. Try replacing it with a new battery pack. Also, check the connection to the transceiver to ensure it's properly connected.
Why transmitting is impossible on Icom IC-GM1600E?
If you cannot transmit or select high power on your Icom Two-Way Radio, the battery may be exhausted. Replace the battery pack. Alternatively, the output power might be set to low. Push the [Hi/Lo• ] button to select high power.
How to unlock channels on Icom IC-GM1600E Two-Way Radio?
If the displayed channel on your Icom Two-Way Radio cannot be changed, the lock function may be activated. Push the [Hi/Lo• ] button for 1 second to cancel the function.
What to do if Icom IC-GM1600E Two-Way Radio transmits continuously with VOX?
If your Icom Two-Way Radio is transmitting continuously when using the VOX function, the ambient noise might be too loud. Try removing the headset cable. You can also set the VOX gain to dulling.
General| Brand | Icom |
|---|---|
| Model | IC-GM1600E |
| Category | Two-Way Radio |
| Language | English |
To Next Page
