29
7
DIGITAL SELECTIVE CALLING (DSC)
D Sending a Test call
channels. When you cannot avoid testing on a Distress or safety channel, you should
indicate that these are test calls.
involved.
1. Push
.
• The “Compose Non-Distress” screen is displayed.
L You can also display the “Compose Non-Distress”
screen by selecting the “Other DSC” item on the Menu
screen.
2. Select “Test,” and then push [ENT] or [CH/ENT].
• The Test call is selected, and returns to the “Compose
Non-Distress” screen.
3. Select “Address,” and then push [ENT] or [CH/ENT].
• The “Address” screen is displayed.
4. Select a station to send the Test call to.
L You can also select “Manual Input” to manually enter
the calling station.
5. Push
to send the Test call.
L If Channel 70 is busy, the transceiver stands by until
the channel becomes clear.
6.
• An alarm sounds.
• The screen on the right is displayed.
7. Push
to turn OFF the alarm.
•
8. Push
.
• The received call’s information is displayed.
• The call is saved in the DSC Log.
9. Push
to return to the operating screen.
• “Terminate the procedure. Are you sure?” is
displayed.
10. Push
to return to the operating screen.
•
To Next Page
Loading...
