Icom IC-M510

52
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
AIS FUNCTION
8
D Plotter screen
Displays the plotter display and selected
target’s information.
1 3
4
5
6
2
789
1DISPLAY TYPE
Displays the selected display type. You
can select the display type in “North up/
Course up” on the Menu screen. (p. 59)
[MENU] > Settings > AIS >
North up/Course up
L When “N-UP” is displayed, the top of
the plotter screen represents North.
L When “C-UP” is displayed, the top
of the plotter screen represents the
direction your vessel’s course over
ground.
2YOUR VESSEL ICON
Displayed in the center of the screen.
L When “N-UP” is displayed, the vessel
icon automatically points in the direction
your vessel is heading, in 5.625 degree
steps.
L When “C-UP” is displayed, the vessel
icon constantly points to the top of the
plotter screen.
L When your vessel moves less than
2 knots,
is displayed.
3TARGET ICONS
Targets whose AIS signal are received are
displayed with icons. The icon may di󰀨er,
depending on the target type or its status.
Icon Description
AIS target: Vessel
L The tip of the target triangle
automatically points in the
direction it’s heading.
AIS target: Vessel (Friend)
(Yellow triangle)
AIS target: AIS-SART, AIS-
MOB, and EPIRB-
AIS
AIS target: Search and Rescue
(SAR) vessel
AIS target: Search and Rescue
(SAR) aircraft
AIS target: Aids to Navigation
(AtoN)
AIS target: Aids to Navigation
(AtoN) virtual
AIS target: Base station
Waypoint
L is displayed during navigation.
MOB
L Icons for other than the SAR aircraft,
Base station, Waypoint, and MOB are
displayed in red or white while in the
Night mode (pp. 12, 82) , when the
AIS target is closer than your CPA and
TCPA settings (Danger target).
L A vessel is regarded as a “Lost target,”
and a red cross mark displays on the
target icon after a specied period of
time has passed since the vessel last
transmitted data (p. 71). The Lost
target icon disappears from the plotter
display 6 minutes and 40 seconds after
the vessel was regarded as a “Lost
target.” Ask your dealer for details.
4COMPASS
Displays the bearing information.