4
Rotate the right-hand Channel
Selector knob to select the first
character position.
Rotating the channel
selector knob selects the
character position where
you want to enter a letter
or number.
5
Using the keypad, enter the
desired character.
6
Rotate the right-hand Channel
Selector knob to select the next
character position.
Use the "1" key for Q, Z, q,
z, and space, the "0" key
for 0, and symbols + - = /
( ) * < > and @
7
Using the keypad, enter the next
character.
8
Continue with steps 6 - 7 until you
have either completed the channel
label, or all eight positions are
filled.
The maximum channel
label size is eight
characters.
9 Press ENT when finished.
Stores the newly entered
channel label into the
radio's permanent
memory.
WWW.RADIOS.NET.AU
ICOM M802 PROGRAMMING INSTRUCTIONS
www.radios.net.au t. 07-41257700 f 03-8640-0419 e. sales@radios.net.au
To Previous Page
Loading...
