To Next PageTo Next Page
Need help?Do you have a question about the Icom IC-M803 and is the answer not in the manual?
General| Frequency Range (TX) | 1.6 - 30 MHz |
|---|---|
| Frequency Range (RX) | 0.5 - 30 MHz |
| Type | MF/HF Marine Transceiver |
| Power Output | 150 W PEP |
| Modes | SSB, AM, DSC |
| Receiver Sensitivity | 0.5 μV (SSB) |
| Power Supply Requirement | 13.8 V DC |
Defines DANGER, WARNING, CAUTION, and NOTE terms for safety and operation.
Step-by-step guide for making a distress call via DSC.
Specifies safe distances and conditions for RF exposure compliance.
Details the equipment's compliance with FCC Part 15 rules.
Lists critical safety warnings for operating the transceiver.
Explains the meaning and function of various keys and icons.
Outlines requirements for ship radio station and operator licenses.
Describes the connectors and controls on the main unit's front.
Details the connectors and ports on the main unit's rear.
Explains the controls and display of the remote controller.
Describes the main screen display areas and indicators.
Guides the user through initial MMSI code entry for DSC.
Explains how to navigate and use the transceiver's menu system.
Details methods for selecting operating channels and groups.
Explains how to receive signals and transmit calls.
Explains how to set up and use the transceiver for HF e-mail.
Describes adjusting display backlight and using scan features.
Guides on editing user, simplex, and e-mail channels.
Covers entering, editing, and deleting DSC address IDs.
Explains manual input of position and UTC time for distress calls.
Describes the single-task mode for handling DSC calls.
Details the procedure for sending a simple distress call.
Explains the process of sending an individual DSC call.
Covers the procedure for sending a DSC group call.
Explains sending DSC calls to a specific geographic area.
Guides on sending test DSC calls.
Describes how to receive distress calls and alarms.
Covers receiving and processing distress ACK/Cancel messages.
Explains how to receive distress relay calls.
Details how to receive individual DSC calls.
Covers receiving acknowledgments for individual calls.
Explains how to receive DSC group calls.
Details receiving geographical area DSC calls.
Explains how to receive test DSC calls.
Covers receiving acknowledgments for test calls.
Explains how to view received and transmitted DSC logs.
Introduces the DSC settings menu and its main categories.
Details how to configure scanning for emergency frequencies.
Covers automatic channel switching and NMEA data output settings.
Explains how to configure alarms for different DSC call types.
Covers self-check tests and DSC task procedures.
Lists and describes main configuration settings.
Explains how to set inactivity timers for different modes.
Lists main radio settings like channels, auto-tune, and noise reduction.
Lists the items included in the transceiver package.
Guides on connecting microphones, remote controls, and PCs.
Details rear panel connections for antennas and tuners.
Explains proper grounding techniques and power requirements.
Provides instructions for mounting the transceiver and remote controller.
Guides on how to replace internal fuses.
Provides pin assignments and specifications for various connectors.
Lists key technical specifications of the transceiver.
Describes optional accessories like tuners, antennas, and microphones.
Provides solutions for common operational problems.
