Icom IC-M803 - DSC OPERATION; DSC Settings Overview

55
DSC OPERATION
7
7
■ DSC Settings
D Position Input (p. 26)
D Individual ID (p. 24)
D Group ID (p. 24)
D DSC Frequency
This set frequencies are selectable when you want to
send an Individual call, Group call, and Geographical
Area call. Usually your dealer has set all the DSC
frequencies to use.
To add a new DSC frequency:
1. Open “DSC Frequency.”
[MENU] > DSC Settings > DSC Frequency
2. Select a DSC frequency number.
3. Select “Use.”
4. Select an option.
5. Select “Frequency.”
6. Enter a receive frequency, and then push .
7. Enter a transmit frequency, and then push
.
8. Select “Name.”
9. Enter a DSC frequency name, and then push
.
10. Push .
• “Are You Sure?” is displayed.
+
Push
Rotate
+
Push
Rotate
+
Push
Rotate
+
Push
Rotate
+
Push
Rotate
+
Push
Rotate
+
Push
Rotate
+
Push
Push
[◄]/[►]
[▲]/[▼]