16
6
OTHER FUNCTIONS AND OPERATIONS
■ Backlight function
The function display and keys can be backlit for better
visibility under low light conditions.
You can set the Backlight mode to Day mode or Night
mode. The Day mode is for the daytime operation,
and the screen items are in color. The Night mode
is for nighttime operation, and the screen items are
displayed in black and red.
1. is displayed in the
Software Key area.
2. Push to open the Backlight setting
window.
3.
L In the Backlight Setting window, if you push no key
for about 5 seconds, the transceiver automatically
Day mode
Night mode
Auto
The Day mode or the Night mode is automatically
selected.
4.
L
■ Scan
The transceiver has automatic channel and frequency
scan capabilities (Scan function). There are 3 types of
scan functions.
z CH (Channel)
z CH Resume
z Program
D
CH and CH Resume
The CH and CH Resume searches within a 20
channel range, such as channel 1 to channel 20, in
the user channels, and searches all channels in the
same bandwidth in the group of ITU channels and ITU
CH:
transmission starts on the displayed channel.
Even though the squelch is open, the channels are
(p. 65)
Speed
CH Resume:
displayed channel while keeping the scan status.
When 30 seconds have passed since the transmission
stops, scanning is resumed.
While the squelch is open, the channels are switched
every 10 seconds.
(p. 65)
Type
1. (p. 12)
2. is displayed in the
Software Key area.
3. Push to start a scan.
4. Push again to stop the scan.
CH 01
CH 05
CH 20
CH 03
CH 04
CH 02
+
Push
Rotate
To Next Page
Loading...
