What to do if Icom Transceiver has little or no sound?
If little or no sound comes from the Icom Transceiver speaker, there could be several reasons. First, the squelch level might be set too high; try adjusting it. Second, the volume level could be too low; adjust the volume. Finally, if the speaker has been exposed to water, use the AquaQuake Water Draining function to remove water from the speaker grill.
How to fix Icom IC-M85 that does not turn on?
If your Icom Transceiver does not turn on, it could be due to a couple of reasons. The battery might be exhausted, in which case you should recharge the battery pack. Alternatively, the battery pack might not be correctly attached; make sure to reattach it properly.
Why Icom IC-M85 Transceiver cannot transmit or select high power?
If you cannot transmit or select high power on your Icom Transceiver, it could be due to a couple of reasons. Some channels may be set for low power or receive only by regulations, so try changing channels. Alternatively, the output power might be set to low; push [H/L] to select high power.
What to do if Icom IC-M85 Transceiver keypad and [DIAL] don't work?
If the keypad and [DIAL] on your Icom Transceiver are not working, it is possible that they are locked. To unlock them, hold down [ ] for 1 second.
How to turn on beep sounds on Icom Transceiver?
If there are no beep sounds on your Icom Transceiver, the Key Beep function might be turned OFF. Turn ON the Key Beep function to enable the beep sounds.
Why does scan not start on Icom IC-M85 Transceiver?
If the scan function does not start on your Icom Transceiver, it might be because more than 2 favorite channels are not set. Set the Favorite channels to resolve this issue.
General| Purpose | Multi-Use Radio Service (MURS) |
|---|---|
| Operating frequency | 136.000 – 174.000 MHz |
| Antenna connector type | FA-SC58V |
| Number of antenna connectors | 1 |
| Battery type | BP-290 |
| Battery low indication | Yes |
| Product color | Black |
| Waterproof up to | 1 m |
| Operating temperature (T-T) | -20 - 60 °C |
| Number of batteries included | 1 pc(s) |
Weight and Dimensions| Depth | 29 mm |
|---|---|
| Width | 56 mm |
| Height | 92 mm |
| Weight | 246 g |
Provides critical safety warnings, definitions of terms, and essential operating instructions.
Outlines emergency distress call procedures and recommendations for transceiver care.
Details critical DANGER, WARNING, and CAUTION statements for safe operation and handling.
Covers call priorities, privacy rules, and requirements for ship station and operator licenses.
Lists included accessories and provides instructions for attaching the flexible antenna.
Guides for attaching and detaching the battery pack and belt clip for secure use.
Identifies all buttons, connectors, and indicators on the transceiver's front, top, and side panels.
Explains the meaning of various icons and indicators shown on the transceiver's display.
Details critical safety warnings for battery pack handling, charging, and temperature limits.
Provides guidance on safe charging practices, warnings during charging, and temperature specifications.
Describes the supplied and optional battery chargers and their charging times.
Guides on connecting chargers, status indicator meanings, and fuse replacement procedures.
Instructions for selecting channels, setting call channels, and changing channel groups.
Covers basic transmission/reception, ATIS code entry, and tips for clear communication.
Explains how to adjust squelch, use VOX function, and operate scanning features.
Details on Normal Scan and Priority Scan modes and their configurations.
Instructions for setting favorite channels and initiating or canceling scans.
Details on monitoring Channel 16 and call channels simultaneously with Dualwatch/Tri-watch.
Instructions on how to start, operate, and cancel Dualwatch or Tri-watch modes.
Covers using the LAND channel group for simple communication with LMR/PMR transceivers.
Explains how to check the battery health and cycle status via the transceiver's indicators.
Explains how to enter Set Mode and select different setting items for customization.
Details on Beep, WX Alert, Scan Type, Scan Timer, Auto Scan, and Dual/Tri-watch settings.
Provides detailed technical specifications for the IC-M85 and IC-M85E marine transceivers.
Lists available optional accessories such as battery packs, chargers, microphones, and cables.
Instructions for using specific accessories like the HM-222 speaker microphone and BP-291 battery case.
A comprehensive list of VHF marine channels, frequencies, and usage notes.
Provides solutions for common problems encountered with the transceiver's operation.
Information on CE/DOC compliance, product disposal, and international country codes.
Details on firmware identification, FCC compliance, and radio frequency exposure safety.
To Next Page
