17
New2001New2001
DUALWATCH/TRI-WATCH
7
■ Description
Dualwatch and Tri-watch are convenient to monitor Channel
16 while you are operating on another channel.
When a signal is received on
the Channel 16.
Dualwatch resumes after
the signal disappears.
When a signal is received:
• On Channel 16
Dualwatch or Tri-watch pauses on Channel 16 until the
signal disappears.
• On the Call channel
Tri-watch switches to Dualwatch until the signal on the
Call channel disappears.
■ Operation
1.
Select Dualwatch or Tri-watch in the Set mode (p. 20).
2. Select a channel.
3. Hold down [DUAL] for 1 second to start Dualwatch or
Tri-watch.
• During Dualwatch, “DUAL 16” blinks.
• During Tri-watch, “TRI 16” blinks.
L A beep tone sounds
when a signal is received on Channel 16.
L Tri-watch becomes Dualwatch while receiving a signal on the
call channel.
4. Push [DUAL] again to cancel Dualwatch or Tri-watch.
Example: Operating Dualwatch on Channel 07.
Dualwatch starts.
CH 88
CH 16
Monitors Channel 16
while listening on
another channel
(example: CH 88).
Monitors Channel 16 and
the Call channel while
listening on another
channel (example: CH 88).
Call
channel
CH 88
CH 16
CH 9
Push [DUAL].
To Next Page
Loading...
