Icom IC-M803

60
7
DSC OPERATION
■ DSC Settings
D Self Check Test
The Self Check test sends DSC signals to the
receiving AF circuit to compare the sending and
receiving signals at the AF level.
1. Open “Self Check Test.”
[MENU] > DSC Settings > Self Check Test
2. Push [ENT], or
to start the Self Check
Test.
L When the sending and receiving DSC signals match,
“OK” is displayed.
D Procedure
You can select the type of task for the transceiver,
depending on the presetting.
1. Open “Procedure.”
[MENU] > DSC Settings > Procedure
2. Select an option.
• Single: Handles only 1 task at the same time.
• Multiple: Handles up to 7 tasks at the same
time.
+
Push
Rotate
Push