Icom IC-M803

50
7
DSC OPERATION
■ Receiving DSC calls (other)
D Receiving an Individual Acknowledgment (continued)
When receiving “ACK (New CH)”:
You can communicate on the frequency that the called
station proposed.
1. When “ACK (New CH)” is received:
• The emergency alarm sounds until you turn it
OFF.
• “Received Individual ACK” is displayed.
Push
to turn OFF the alarm.
2. Push .
• The Voice frequency that the called station specied
is automatically selected.
• Rotate [CH/GRP] to conrm the call contents.
L See pages 27 and 28 for details of the Software Key
functions in the DSC Task mode.
3. Hold down [PTT], and then explain your situation.
4. After you have finished your conversation, push
, and then to return to the
Main screen.
D Receiving a Group call
NOTE: To receive an Group call, push [D-SCAN] to
enter the DSC watch mode. (p. 13)
When a Group call is received:
• The emergency alarm sounds until you turn it OFF.
• “Received Group Call” is displayed.
1. Push to turn OFF the alarm.
L When “Accept after 10 sec.” or “Ignore after 10 sec.”
is selected in “CH Auto Switch” setting, the countdown
is displayed on the bottom of the window. (p. 58)
After 10 seconds have passed since is
pushed, the screen will move to the DSC Task screen,
or return to the Main screen.
2. Push the Software Key below the intended
operation.
: Ignores the call and returns to the Main
screen.
: Puts the RX task on hold, and returns
to the Main screen.
: Pauses the countdown.
: Enters the DSC Task mode
immediately.
Rotate