Need help?Do you have a question about the Icom IC-R71A and is the answer not in the manual?
General| Frequency Range | 0.1-30 MHz |
|---|---|
| Mode | SSB, CW, AM, FM |
| Antenna Impedance | 50 Ω |
| Sensitivity (SSB/CW, 1.6-30 MHz) | 0.5 µV |
| Sensitivity (SSB/CW, 0.1-1.6 MHz) | 1.0 µV |
| Sensitivity (FM, 28-30 MHz) | 0.5 µV |
| Selectivity (SSB/CW) | 2.4 kHz / 6 dB |
| Selectivity (AM) | 6 kHz / 6 dB |
| Selectivity (FM) | 15 kHz / 6 dB |
| Image Rejection | >70 dB |
| IF Frequencies | 455 kHz |
| Power Supply | AC 100V |
| Tuning Steps | 1 kHz / 10 kHz |
Covers frequency coverage, control, readout, stability, power requirements, and physical dimensions.
Details all controls, switches, and indicators located on the front panel of the device.
Outlines connectors and controls found on the rear panel for external connections.
Explains the operational principles and circuits of the RF unit.
Details the operational aspects of the main unit circuits.
Explains the operational principles of the Phase Locked Loop (PLL) unit.
Describes the primary functions of the logic unit.
To Next Page
