Need help?Do you have a question about the Icom IC-R71 and is the answer not in the manual?
General| Power Requirements | 13.8 V DC |
|---|---|
| Frequency Range | 0.1-30 MHz |
| Modulation Modes | AM, FM, SSB, CW |
| Sensitivity | 0.5 μV (SSB) |
| Selectivity | 2.4 kHz (SSB) |
| Image Rejection | 70 dB |
| IF Bandwidths | 6 kHz |
| Power Supply | AC or DC |
Details controls for tuning, frequency bands, and VFO/memory selection.
Provides a step-by-step guide for performing calibration and adjustments on the PLL unit.
Details procedures for adjusting receiver performance parameters and sensitivity.
Presents the detailed circuit and voltage diagram for the main unit.
Presents the detailed circuit and voltage diagram for the RF unit.
Presents the detailed circuit and voltage diagram for the PLL unit.
Presents the detailed circuit diagram for the logic unit.
Presents a comprehensive schematic diagram illustrating the entire IC-R71A/E/D system.
To Next Page