Icom IC-W2E - Numeral Key Frequency Input

SETTING A FREQUENCY 5
@ Using numeral keys
1) Push [V MAIN] or [U MAIN] to select the desired band. 3) Push 4 appropriate digit keys to input a frequency.
When a wrong digit is input, push [%) CLR] to clear the input,
2)
Push
[@
ENT]
to
activate
the
keyboard
for
numeral
input.
then
start
again
from
step
2.
« "5" or 0” are acceptable for 1 kHz digits; ‘'2” or ‘7’ are also
acceptable depending on the 10 kHz digit.
[EXAMPLE] Set the frequency to 146.520 MHz.
This dot appears
when frequency
input is com-
pleted.
fuasi}
652 430.80
This dot appears
when frequency
input is com-
pleted.
om —
46.52 43G8C 652 YIGLE
‘
' ‘ '