5 - 2
• ENTERING THE ADJUSTMENT MODE
1) Connect the JIG cable “#1” to [SP]. (See page 5-1)
2) While holding down [SQL] and
, turn ON the power.
• KEY ASSIGNMENTS FOR THE ADJUSTMENT MODE
• QUITING THE ADJUSTMENT MODE
1) Remove the JIG cable “#1” from [SP].
2) Turn OFF the power, and then turn ON the power.
Adjustment frequency
Adjustment item
Adjustment value
Adjusts the value for the item
Selects the previous adjustment item
Selects the next adjustment item
(without storing value)
Stores the value for the item
TX output power
Mode
Push to turn ON the power.
[SQL]
[QUICK/MENU]
Connect the JIG cable “#1” (See page 5-1) here.
To Next Page
Loading...
