Need help?Do you have a question about the Icom ID-51E and is the answer not in the manual?
General| Brand | Icom |
|---|---|
| Model | ID-51E |
| Category | Transceiver |
| Language | English |
Describes overall device characteristics and operating parameters.
Details performance metrics for the transmission function.
Details performance metrics for the reception function.
Identifies components and layout of the logic circuit board.
Identifies components on the main circuit board's top side.
Identifies components on the main circuit board's bottom side.
Step-by-step guide to detach the logic board assembly.
Step-by-step guide to detach the main circuit board.
Explains the signal path and components for receiving RF signals.
Details the first intermediate frequency stages of the receiver.
Details the second intermediate frequency stages of the receiver.
Explains the signal path and components for transmitting RF signals.
Describes the generation of local oscillator signals for tuning.
Lists CPU pin assignments and their corresponding functions.
Lists required test equipment, cables, and setup for adjustments.
Procedure to access the device's calibration mode.
Explains controls used within the adjustment mode.
Procedure to exit the calibration mode.
Steps to calibrate the radio's frequency accuracy.
Procedures for adjusting transmit power and current.
Procedures for adjusting receive sensitivity and S-meter levels.
List of mechanical components specific to the radio's chassis.
List of mechanical components for the main unit assembly.
List of mechanical components for the Voltage Controlled Oscillator units.
List of mechanical components for the logic circuit board.
List of included items like straps and chargers.
Visual representation of component placement on the logic board.
Visual representation of component placement on the main board.
Visual representation of component placement on VCO boards.
Illustrates voltage distribution and power supply lines on the logic board.
Illustrates voltage distribution and power supply lines on the main board.
Illustrates voltage distribution for VCO units.
To Next Page
