Icom iF4029SDR

23
7
DIGITAL OPERATION
n Status message
ï General
The status message can be selected with the programmed
text, and the message text is also displayed on the function
display of the called station.
Up to 32 status types (1 to 32) are available, and the status
messages 30, 31 and 32 have designated meanings.
Status 30: ‘CALL HOME’
Status 31: ‘URGENT PICKUP’
Status 32: ‘RETURN TO BASE’
ï Transmitting a status
q Set the desired Common ID. (pgs. 19 and 39)
w Push (Select), then push [Side2] (CH Up) or [Side3] (CH
Down) to select the desired status message.
e Push (Call) to transmit the status message to the se-
lected station/group.
• “FAILED” is displayed when status call is un-succeeded.
• The transceiver returns to the standby condition automatically
when the transmission is successful.
ï Receiving a status message
q When a status message is received;
• Beeps sound.
• The status message displayed.
• When a status message with more than 9-character is received,
the first 8-character and then the remaining characters are dis-
played alternately.
When 15-character status message
is received.
w Push any key to return to the standby condition.