EasyManua.ls Logo

Icom iM304 - 11 Specifications and Options; I Specifications

Icom iM304
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
11
SPECIFICATIONS AND OPTIONS
10
11
■ Specifications
ïï
General
• Frequency coverage : Transmit 156.025–157.425 MHz
Receive 156.050–163.275 MHz
• Mode : FM (16K0G3E)
DSC (16K0G2B)
• Channel spacing : 25 kHz
• Current drain (at 13.8 V) : TX (at 25 W) 5.5 A max.
Max. audio 1.5 A max.
• Power supply requirement : 13.8 V DC ±15%
• Frequency stability : ±10 ppm
• Operating temperature range: –20°C to +60°C; –4°F to +140°F
• Dimensions : 153(W) × 67(H) × 133(D) mm
(Projections not included) 6
1
⁄32(W) × 2
5
⁄8(H)× 5
1
⁄4(D) in
• Weight : Approx. 825 g ; 1.8 lb
ïï
Transmitter
• Output power : 25 W (High) and 1 W (Low)
• Modulation system : Variable reactance frequency modu-
lation
• Max. frequency deviation : ±5.0 kHz
• Spurious emissions : Less than –70 dBc (High)
Less than –56 dBc (Low)
• Adjacent channel power : More than 70 dB
ïï
Receiver
• Receive system : Double conversion
superheterodyne
• Sensitivity (12 dB SINAD) : 0.22 µV (typical)
• Squelch sensitivity : Less than 0.22µV
• Intermodulation rejection ratio : More than 70 dB
• Spurious response rejection ratio : More than 70 dB
• Adjacent channel selectivity : More than 70 dB
• Audio output power : 4.5 W (typical) at 10%
distortion with a 4 Ω load
All stated specifications are subject to change without notice or
obligation.