Icom UT-109 - IC-F3 GT;GS, IC-F4 GT;GS Series Modification Points; Modification Points for IC-F3 GT;GS; Modification Points for IC-F4 GT;IC-F4 GS

• Modification points. (C and F) • Cut the junction patterns C and F on the PC board
same as above.
• Modification points. (C and F) • Cut the junction patterns C and F on the PC board.
IC-F3GT/GS, IC-F4GT/GS SERIES MODIFICATION POINTS
F
C
Service window
F
C
Service window
M Model: IC-F3GT/GS
M Model: IC-F4GT/IC-F4GS
- 8 -