L
Laura GambleAug 3, 2025
What to do if ICON Health & Fitness Treadmill walking belt is off-center?
- LlisamoonAug 3, 2025
If the walking belt of your ICON Health & Fitness Treadmill is off-center, adjust the incline to 40 percent, remove the key, and unplug the power cord. If the belt has shifted left, turn the left idler roller screw clockwise 1/2 turn; if it has shifted right, turn the left idler roller screw counterclockwise 1/2 turn. If the walking belt slips, adjust the incline to 40 percent, remove the key, and unplug the power cord. Then, use the hex key to turn both idler roller screws clockwise 1/4 of a turn.