26
1.0 Keyboard elements assignment
These elements include the key switches, velocity curve, modulation/pitch bend jog
wheel, Sustain & Expression pedal, Transpose & Octave buttons. These elements are
assigned by the top three drop down windows. To assign a control, select it by clicking
it and assign a different midi message by the two drop down menus (MIDI Channel & CC).
Section 1
1.1 1.2 1.4
1.3
1.1 MIDI Channel
Assign MIDI channel from 0-16.
1.2 CC valuel
Assign MIDI CC value from 0-127.
1.3 Velocity Curve
Select the available velocity curve of your keybed. For the difference velocity curve
diagram, please refer to P.33.
1.4 Sustain Pedal
You could reverse the sustain pedal connector polarity. Please refer to P.32 for details.
2.0 Control surface elements assignment
These elements include all the buttons, the knob and the touch pad. These elements are
assigned by the lower four drop down menus.
Note: iKeyboard X has built-in Mackie Control protocols & HUI for different DAW such
as Cubase
TM
, Samplitude
TM
, Abelton Live
TM
, Logic Pro
TM
, Bitwig
TM
, Reasons
TM
, Reaper
TM
,
Studio One
TM
and ProTools
TM
By selecting the correct DAW and Mackie control (HUI)
protocol, ikeyboard X has automatically mapped the major functions and work seamlessly
with that DAW.
2.22.1
Section 2
To Next Page
Loading...
Need help?
General
