ICON NXT Pro - Technical Specifications

5
5. Technical specifications
NXT PRO
Function
On/Off + Configuration
Modes
Mode 1 Pressure Controller
Mode 2 Pressure Switch
Pump size
Up to 2.2kW - 240V 1Ph
Input power
80 - 240V 1ph 50Hz
Generator compatible
Max Amperage
16 amp
Connection Size
1" BSP Male
Pressure Tank
0.3l removable spring controlled diaphragm tank
Internal 1” BSPF thread to connect external pressure
vessel once OEM accumulator removed
Pump Start pressure
Default 2.2 bar
User adjustable 0.5 - 6.0 bar
Pump stop
Flow less than 0.9 lpm in Mode 1
User adjustable 1.8 - 9.0 bar in Mode 2
Maximum pressure
10 bar. Pressure differential range 0.3 – 8.5 bar
Max ambient air temp
3 - 50°C
Max water temp
3 - 60°C
Maximum flow
Tested to 150 lpm / 9m
3
/hr - 1" outlet
Tested to 300 lpm / 18 m
3
/hr - 1 ¼” outlet
Cable to Pump
‘Plug and Play’ IEC C13/C14 appliance connector.
Fly lead supplied when purchased as control only
Power Cable
10 amp
IP Rating
IP65
Accessories
(Sold Separately)
15 amp cables
1 ¼” union kit for flows up to 300 lpm