Note: All BLUETOOTH connections between the console
and other devices (including any smart devices, heart rate
monitors, and so forth) will be disconnected.
THE SETTINGS MODE
The console features a settings mode that allows you to
select a unit of measurement for the console and to view
console usage information.
To select the settings mode, press and hold down the On/
Reset button until the settings mode information appears
in the display.
The console can show pedaling speed and
distance in either miles or kilometers. The
upper display will show the selected unit
of measurement. An E for English miles or
an M for metric kilometers will appear in the display. To
change the unit of measurement, press the Intensity but-
ton repeatedly.
Note: When you replace the batteries, it may be necessary
to reselect the unit of measurement.
Press the Wt. Loss button to view the
total distance and the total time. The
center display will show the total time (in
hours) that the console has been used
since the exercise bike was purchased.
The lower display will show the total dis-
tance (in miles or kilometers) that the exercise bike has
been pedaled.
To exit the settings mode, press the Wt. Loss button
repeatedly.
To Next Page
Loading...
Need help?
General
