IconBiT XDS1003D - 4. Upgrading the Firmware

iconBIT XDS1003D User Manual English
24
4. Upgrading the Firmware
The firmware is the operating system (OS) installed on the device. Firmware upgrades can
bring new features, improvements and bug fixes.
Method 1
Step 1: Copy ‘install.img’ to the root directory of a USB stick, and connect it to the USB
HOST port of the player.
Step 2: Press and hold the U button on the back panel, and do not loosen.
Step 3: Plug the power cable into the DC IN jack, wait for about 5 seconds or more, and
then loosen your finger on the U button;
Firmware installation will start.
Method 2
：
Step 1, Copy ‘install.img’ to the root directory of a USB stick, and connect it to the USB
HOST port of the player.
Step 2, Enter Setup

Misc menu, select USB Upgrade, firmware installation will start.
Downloaded From Disc-Player.com IconBit Manuals