3
VF1
1 - INTRODUCTION
Thank you for purchasing the Iconic VF1 vacuum forming machine. Please read the contents of this manual to ensure
safe and trouble free operation whilst achieving the highest quality results.
The vacuum forming procedure involves heating vacuum forming material for a set length of time or to achieve a
specic amount of sag in the blank before vacuum forming the material. Because of this process, the Iconic VF1
machine must not be left unattended whilst in operation.
2 - TECHNICAL SPECIFICATIONS
Power supply: Unique voltage 50 Hz / 230V
Consumption power: 925W average
Heating power: 450W Motor Power: 1400W
Plate Dimensions:
Thickness up to 6mm
Round Plate: From Ø120 to Ø134mm
Square Plate: From 120x120mm to 130x130mm
Dimensions: (WxDxH) 180 x 230 x 290 mm (w/o packaging) 200 x 250 x 300 mm (w/ packaging)
Weight: 4.500 kg (w/o packaging)
5.235 kg (w/ packaging)
Pollution Degree: 2 Protection
Degree: IPX1 (Protected against splatter)
Noise Level: Motor 80/90 dB to 0.50m
3 - PACKAGING CONTENTS
01 - Power cable 01 unit
02 - Glass beads 250g
03 - Allen wrench 4mm 01 unit
04 - Plates display 01 unit
05 - Model holder 01 unit
06 - Instruction manual 01 unit
07 - Iconic VF1 230V 01 unit
08 - Vacuum activating handles 02 unit
09 - Heating unit handle 01 unit
10 - Rotary ring handle 01 unit
01
02
03
05
06
07
08
09
10
To Next Page
Loading...