22
PMX-090T DM&P Vortex86MX+ Panel PC with 9” WSVGA TFT LCD
Operating system support
The PMX-090T provides the VGA and LAN drivers for Linux, Windows CE,
Windows XP Professional, and Windows Embedded standard (XPE). (Linux can use
with Compact Flash card only.)
Please get the drivers from ICOP official website: tech.icop.com.tw
PMX-090T also supports most of the popular Linux distributions, for more
detail information, please visit DMP official website:dmp.com.tw/tech/vortex86mx
3.1 PMX-090T Development Note
<Primary /Secondary IDE: Master or Slave>
1. Micro SD: Primary Master
2. CF Slot: Secondary IDE: Master or Slave (User can use slide switch (in side of
CF slot) to adjust Master or Slave
<Window CE6.0 development guide>
Windows Embedded CE 6.0 BSP, trial CE image and development notes,
please visit technical website to get more information: tech.icop.com.tw
<Linux installation note>
Please forced the IDE setting in BIOS to PIO mode before install Linux
on PMX-090
T as follows:
3. Go to the advanced BIOS setting and make the “Onboard IDE Operate
Mode” is “Legacy Mode”
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
