© 2021 ICS®, Oregon Tool Inc. REV12232021 P/N 610794
536-E OPERATOR MANUAL
11
4. Power tool use and care
a. Do not force the power tool. Use the correct power tool for your
application.
for which it was designed.
Any power tool that cannot be controlled with the switch is dangerous
and must be repaired.
Such preventive safety measures reduce the risk of starting the power
tool accidentally.
d. Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to
operate the power tool.
Power tools are dangerous in the hands of untrained users.
If damaged, have the power tool repaired before use. Many accidents are
caused by poorly maintained power tools.
Properly maintained cutting tools with sharp cutting edges are less likely
to bind and are easier to control.
and the work to be performed.
result in a hazardous situation.
Slippery handles and grasping surfaces do not allow for safe handling
and control of the tool in unexpected situations.
General Power Tool Safety Warnings
To Next Page
Loading...