© 2021 ICS®, Oregon Tool Inc. REV12232021 P/N 610794
536-E OPERATOR MANUAL
12
ENGLI SH
5. Service
only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
b. This power cutters electronics are not user serviceable.
Do not remove covers or disable the tool except as directed by this manual.
Lethal voltages may be present.
a. Keep all parts of the body away from the power cutter chain when the power
A moment of inattention while operating power cutters may cause
entanglment of your clothing or body with the concrete power cutter chain.
work area on the other side.
The concrete cutter chain may protrude through the workpiece.
your left hand on the front handle.
Power cutter chains contacting a “live” wire may make exposed metal parts of
the power tool “live” and could give the operator an electric shock.
Proper handling of the power cutter will reduce the likelihood of accidental
contact with the moving components.
drive sprocket maintenance.
inadequate water pressure and or premature wear to the guidebar.
result in a hazardous situation.
i. Never attempt to cut ductile iron or similiar pipe materials with
the power cutter unless using PowerGrit Pipe Cutting chain.
snag abruptly which may result in chain breakage pushback and or kickback.
The items listed immediately below are critical to minimizing the risk of
i. Side cover/chain catcher
ii. Mud ap
iii. Rear hand guard
iv. Front hand guard
v. Trigger interlock
General Power Tool Safety Warnings
To Next Page
Loading...