© 2021 ICS®, Oregon Tool Inc. REV12232021 P/N 610794
536-E OPERATOR MANUAL
27
PRE-OPERATION SAFETY CHECKS
• Test
procedure.
•
• Assure proper chain tension: The chain should be easily pulled around the
guidebar by hand.
• Assure all safety devices are properly mounted and functional and that all
controls are in proper working order.
and no unnecessary people present
• Always wear protective clothing, including hard hat, eye protection, hearing
protection, non-slip safety boots, gloves. Avoid wearing loose fitting clothing.
• Adequate water supply and pressure
|
Operation
To Next Page
Loading...