© 2021 ICS®, Oregon Tool Inc. REV12232021 P/N 610794
536-E OPERATOR MANUAL
28
ENGLI SH
PRECUT CHECKLIST
Operation
kickback.
electrical conduit, air ducts, etc.) that may interfere with the cut.
Check for live electrical wires that may be hidden within or behind walls and/or laying
around the workspace. Assure that any ancillary electrical equipment (fans, pumps,
environment.
Ensure your power source is properly grounded. If using a portable generator, ensure it
information on your generator, refer to the manufacturer’s operator manual.
power cutter.
your thumbs around the handles to assure you maintain a secure grip on both handles.
At a minimum always wear eye protection and/or face shield, hearing protection, long
sleeve shirt, long pants, closed toe shoes with non-slip soles, and gloves. In many work
situations, a hard hat, steel toed shoes and a respirator may also be required. Avoid
readily available.
WARNING
To Next Page
Loading...